Ignition Development System (Version 2)
Home Index Wiring Installation

Coil Wiring Diagrams

Warning

●  Use only resistor spark plug wires and resistor plugs.
●  A minimum of 2000 ohms of resistance is required in each plug wire.
●  If a resistor plug wire is less than 2000 ohms use a resistor plug cap or boot.
●  Due to the high energy and multi-spark capability cross firing is a real concern.
●  Never route wires closer than 1" from each other.
●  Use separators on the plug wires and do not allow the wires to touch each other.

Power Arc IDS Model VP4
VP Series Distributor Mounted Ignitions with No External Module and No High Voltage Distributor Cap

4 Cycle Engine Distributorless (Waste Spark) Wiring

Number of Cylinders

 

 

  4   6   8 

 


Power Arc IDS Model VP2
VP Series Distributor Mounted Ignitions with No External Module and No High Voltage Distributor Cap

4 Cycle Engine Distributorless (Waste Spark) Wiring
 

Number of Cylinders

 

 

  4     

 


Power Arc IDS Models C2 and CP2

4 Cycle Engine Distributorless (Waste Spark) Wiring

Number of Cylinders

 1 

 2 

 4     

4 Cycle Engine Distributor Wiring

Number of Cylinders  

 2 

 4   6   8 

2 Cycle Engine Distributorless Wiring

Number of Cylinders

 1 

 2

     

H-D

Single Fire

 Dual Fire

 


Power Arc IDS Model C1

4 Cycle Engine Distributorless (Waste Spark) Wiring

Number of Cylinders

 1 

 2 

     

4 Cycle Engine Distributor Wiring

Number of Cylinders  

 2 

 4   6   8 

2 Cycle Engine Distributorless Wiring

Number of Cylinders

 1 

 

      

H-D

Dual Fire